No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LDP/4/OPENRETRYTMR

LDP/4/OPENRETRYTMR

Message

LDP/4/OPENRETRYTMR:When the interface [interface-name] cannot join the multicast group, the retry timer was opened.

Description

When the interface failed to add to the multicast group, the reconnection timer was restarted.

Parameters

Parameter Name Parameter Meaning
[interface-name] Indicates the interface name.

Possible Causes

1: Incorrect configurations of the interface that applies for adding to the multicast group resulted in failing to add to the multicast group. Restarted the timer that added to the multicast group. The precondition was that the interval of the timer did not exceed the maximum interval.

2: The invalid ID of the instance that applies for adding to the multicast group resulted in failing to add to the multicast group. Restarted the timer that added to the multicast group. The precondition was that the interval of the timer did not exceed the maximum interval.

Procedure

  1. Run the display current-configuration command to check the configuration of the interface that applies for adding to multicast is correct.
  2. Check whether the number of instances that apply for adding to the multicast group is too large.
  3. Collect log information and configuration information, and then contact technical support personnel.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 541930

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next