No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



SW_SNPG/4/IGMPV2_PKT:Receive IGMP version '[LONG]' query on IGMPv2 port. (Port=[STRING])


An IGMPv2 enabled interface receives an IGMP query message with a higher version.


Parameter Name Parameter Meaning
[LONG] Indicates the version of the received IGMP query message.
[STRING] Indicates the name of the interface that has received the IGMP query message.

Possible Causes

An IGMPv2 enabled interface receives an IGMP query message with a higher version.


  1. Check the IGMP version on the interface.

    • If the switch needs to process IGMP messages of version 3, run the igmp-snooping version version command to set the IGMP snooping version to 3.
    • If the switch does not need to process IGMP messages of version 3, ignore this log.

Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 547819

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next