No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



ALML/4/PWR_NOSUPPLY: The "[STRING1]" sensor[ULONG1] of [STRING2] detects power is online, but no supply.


A sensor detects the power module, but the power module is not supplying power.


Parameter Name Parameter Meaning
STRING1 Indicates the sensor name.
ULONG1 Indicates the sensor ID.
STRING2 Indicates the card name.

Possible Causes

  • The power module is turned off manually.
  • The power module is faulty.


  1. Check whether the power module is turned off manually.
    • If so, turn on the power module.
    • If not, go to step 2.
  2. Rectify the fault according to "A Power Module Cannot Provide Power" in the Revelations of Troublesolving - Campus Switch - Hardware Fault.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 543202

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next