No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MRM/3/CHECKSOCKET_E

MRM/3/CHECKSOCKET_E

Message

MRM/3/CHECKSOCKET_E:In VPN instance "[vpn-instance-name]", MRM failed to check socket ID [protocol-name]. The error code was [error-code]. (FlCode=[STRING][ULONG])

Description

The MRM module on the slave board failed to check the socket ID.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[protocol-name] Indicates the name of the protocol. The value can be:
  • GMP
  • PIM
  • MRM PUBLIC
[error-code] Indicates the error code. The value can be:
  • 1040657: Fail to allocate memory.

  • 1048660: Fail to allocate sockets.

  • 1048662: The task ID is invalid.

  • 1048663: The instance number is invalid.

  • -22: The parameter is invalid.

  • -107: There is no TCB structure.

FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

1:

Programs on the slave board or cooperative programs on the master or slave board are processed abnormally, causing the socket ID to be incorrect.

2:

The socket does not support the checking operation.

Procedure

  1. Restart the slave board.
  2. Run the undo multicast routing-enable command or the undo multicast ipv6 routing-enable command to delete multicast configurations, and then reconfigure related multicast commands.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 553253

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next