No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SNMP/4/SNMP_MIB_SET

SNMP/4/SNMP_MIB_SET

Message

SNMP/4/SNMP_MIB_SET:MIB node set. (UserName=[STRING], SourceIP=[STRING], Version=[STRING], RequestId=[ULONG], [STRING], VPN=[STRING])

Description

The MIB object was set.

Parameters

Parameter Name Parameter Meaning
UserName
Indicates the name of user.
  • For SNMPv1 and SNMPv2c, if a community alias is not configured, UserName is a community in cipher text. If a community alias is configured, UserName is the community alias.
  • For SNMPv3, UserName is a user security mode (USM) user name in cipher text.
SourceIP Indicates the source IP address.
Version Indicates the version.
RequestId Indicates the ID of a request.
[STRING]

Indicates OID and value of a node in a Set request. If the node is a password node, the value is displayed as ******.

If a Set request contains many nodes and the information about these nodes cannot be completely displayed in one log, the information is displayed in multiple logs.

If the length of a node's OID exceeds 512 bytes or the total length of a node's OID and value exceeds 1024 bytes, the last part is displayed as an ellipsis (…).

VPN

Indicates the name of a VPN instance.

Possible Causes

The information about the SET operation on a MIB object was recorded into the log.

Procedure

  • This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 577779

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next