No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IFNET/5/ACOAM_STATE_CHANGE

IFNET/5/ACOAM_STATE_CHANGE

Message

IFNET/5/ACOAM_STATE_CHANGE:The OAM Manager detected interface states change. (InterfaceName=[STRING], State=[STRING])

Description

The OAM manager detected that the interface status changed.

Parameters

Parameter Name Parameter Meaning
InterfaceName indicates the interface name.
State indicates the status of the link layer protocol on the interface. The details are as follows:

1. Up: indicates that the status of the link layer protocol on the interface is normal.

2. Down: indicates that the status of the link layer protocol on the interface is abnormal.

Possible Causes

After the oam detect command was run, the OAM manager received the message that AC OAM status changed.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 549730

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next