No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CFM/4/FILELENGTH_NOTMATCH

CFM/4/FILELENGTH_NOTMATCH

Message

CFM/4/FILELENGTH_NOTMATCH:Failed to set the [object] because the size of the system file is inconsistent with that of the homonymous file on [slot-id].

Description

The configuration failed because the size of the system file was inconsistent with that of the existing file.

Parameters

Parameter Name Parameter Meaning
[object] Indicates the type of the file:
  • Startup file
  • PAF file
  • License file
  • Configuration file
[slot-id] Indicates the name of a board.

Possible Causes

The configuration failed because the size of the system file was inconsistent with that of the existing file.

Procedure

  1. Run the dir command to check whether the size of the system file specified in the startup command is consistent with that of the system file on the main control board.

    • If the sizes of the system files are consistent, go to Step 3.
    • If the sizes of the system files are inconsistent, go to Step 2.

  2. Delete the system file specified in the startup command from the relevant board and upload the file again. Then run the startup command to set the system file to be loaded at the next startup and check whether the configuration succeeds.

    • If the configuration succeeds, go to Step 4.
    • If the configuration fails, go to Step 3.

  3. Run the display diagnostic-information command and save the command output; Collect log information and configuration information, and then contact technical support personnel.
  4. End.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 569220

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next