No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
APS/7/STATE_NOTIFY_PFM

APS/7/STATE_NOTIFY_PFM

Message

APS/7/STATE_NOTIFY_PFM:State changed failed to notify plat. (EventType=[ULONG], MoudleID=[ULONG], GroupIndex=[ULONG], ProtectionType=[ULONG], LocalState=[ULONG], WorkingLinkState=[ULONG], ProtectionLinkState=[ULONG], LocalAPSRequest=[ULONG], LocalRequestedSignal=[ULONG], LocalBridgedSignal=[ULONG], FarEndRequest=[ULONG], FarABit=[ULONG], FarBBit=[ULONG], FarDBit=[ULONG], FarRBit=[ULONG], FarEndRequestedSignal=[ULONG], FarEndBridgedSignal=[ULONG], ErrorCode=[ULONG])

Description

After finishing status calculation, the APS state machine notified the service module of the devices to process the result. If the notification failed, the notified information was recorded for later analysis.

Parameters

Parameter Name Parameter Meaning
EventType Indicates the type of an event.
MoudleID Indicates the index of a module.
GroupIndex Indicates the index of a protection group.
ProtectionType Indicates the protection type.
LocalState Indicates the local status.
WorkingLinkState Indicates the status of the working link.
ProtectionLinkState Indicates the status of the protection link.
LocalAPSRequest Indicates the local APS request.
LocalRequestedSignal Indicates the flag of local receiving.
LocalBridgedSignal Indicates the flag of local sending.
FarEndRequest Indicates the request at the far end.
FarABit Indicates whether the far end uses APS packets.
FarBBit Indicates the protection mode at the far end.
FarDBit Indicates the switching mode at the far end.
FarRBit Indicates the revertive mode at the far end.
FarEndRequestedSignal Indicates the flag of receiving at the far end.
FarEndBridgedSignal Indicates the flag of sending at the far end.
ErrorCode Indicates an error code.

Possible Causes

The devices failed to notify their service module to process the result that was calculated on the APS state machine.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 579543

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next