No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



SECE/4/SPECIFY_SIP_ATTACK:The specified source IP address attack occurred.(Slot=[STRING], SourceAttackIP=[STRING], AttackProtocol=[STRING], AttackPackets=[ULONG] packets per second)


The attack source is displayed when a device is attacked.


Parameter Name Parameter Meaning

Indicates the slot of an MPU or LPU.

SourceAttackIP Indicates the source IP address of an attack.


Indicates the protocol type of attack packets.

AttackPackets Indicates the rate of attack packets, in pps.

Possible Causes

A lot of attack packets from the corresponding IP address were received on the interface.


  1. Run the display auto-defend attack-source command to check whether the user attack packets exist.
  2. If so, run the auto-defend action deny [ timer time-length ] command to discard the attack packets.
  3. If the fault persists, collect log information and configuration information, and then contact technical support personnel. For details, see Troubleshooting-Information Collection-Collecting Diagnostic Information.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 571864

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next