No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ACLE/3/POLICY_APPLY

ACLE/3/POLICY_APPLY

Message

ACLE/3/POLICY_APPLY:Failed apply policy to [STRING]. (ErrorInformation=[STRING])

Description

Failed to deliver a traffic policy.

Parameters

Parameter Name Parameter Meaning
[STRING] Indicates the view to which a traffic policy is applied.
ErrorInformation Indicates the error reason.

Possible Causes

A configuration conflict occurred or resources were insufficient.

Procedure

  1. Run the display traffic-policy applied-record command to check whether the traffic policy is applied successfully.

    • If so, no further action is required.
    • If not, go to step 2.

  2. Check whether MQC has a configuration conflict according to error information in the logs.

    • If so, go to step 3.
    • If not, go to step 4.

  3. Remove the conflicting configuration and reconfigure a traffic policy. Run the display traffic-policy applied-record command to check whether the new traffic policy is applied successfully.

    • If so, no further action is required.
    • If not, go to step 7.

  4. Check whether MQC has insufficient resources according to error information in the logs.

    • If so, go to step 5.
    • If not, go to step 7.

  5. Run the display traffic-policy applied-record command to check whether redundant traffic policies are configured.

    • If so, go to step 6.
    • If not, go to step 7.

  6. Delete redundant traffic policies and reconfigure a traffic policy. Run the display traffic-policy applied-record command to check whether the new traffic policy is applied successfully.

    • If so, no further action is required.
    • If not, go to step 7.

  7. Collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 576745

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next