No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



L2V/3/OTHERCEIDSAME:When inserting RLB into VPN, found the same remote CE ID RLB already existed. (CeId=[ULONG], Old Rlb: Pe=[STRING], Rd=[STRING]; New Rlb: Pe=[STRING], Rd=[STRING])


An RLB with the same remote CE ID already existed when the RLB was inserted into VPN.


Parameter Name Parameter Meaning
CeId Indicates the ID of the CE.
Old Rlb: Pe Indicates the IP address of the PE in the original RLB.
Rd Indicates the route distinguisher of the original label block.
New Rlb: Pe Indicates the IP address of the PE in the new RLB.
Rd Indicates the route distinguisher of the new label block.

Possible Causes

The local site ID was the same as the remote site ID.


  1. Re-configure the two site IDs.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 546714

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next