No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



TUNN_PS/1/REAL_BKP_MEM_FAIL:Failed to allocate the momery when processing realtime backup for PS!


Failed to allocate the memory when processing realtime backup for PS.


Parameter Name Parameter Meaning
None None

Possible Causes

1. The memory block applied for was too large, and there was not enough memory to allocate.

2. The memory was used up, and no available memory existed.


  1. Run display diagnostic-information command and save the display information. Collect log information and configuration information, and then contact technical support personnel.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 568728

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next