No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALML/3/CHANNEL_FAULTY

ALML/3/CHANNEL_FAULTY

Message

ALML/3/CHANNEL_FAULTY:No.[ULONG] channel from slot [STRING] to slot [STRING] is faulty.

Description

The channel becomes faulty.

Parameters

Parameter Name Parameter Meaning
[STRING] Entity name
[STRING] Entity name
[ULONG] Channel No.

Possible Causes

A channel on the interface board fails.

Procedure

  1. Check whether the recovery log ALML/3/CHANNEL_NORMAL is generated later in the log file.
    • If so, the fault is rectified, and no action is required.
    • If not, go to step 2.
  2. Collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 549101

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next