No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MPLS/4/VSI_GET_MCIDX

MPLS/4/VSI_GET_MCIDX

Message

MPLS/4/VSI_GET_MCIDX: Get multicast index failed when create forwarding entry for vsi [STRING].

Description

The device failed to obtain the multicast index when delivering VSI forwarding entries.

Parameters

Parameter Name Parameter Meaning
STRING Indicates the name of a VSI.

Possible Causes

When creating a VSI, the device needs to obtain the multicast index to create a multicast entry. If the multicast entry resources are exhausted, the device cannot obtain the multicast index

Procedure

  1. Check whether the multicast service is required.

    • If so, go to step 3.
    • If not, go to step 2.

  2. Delete the unnecessary multicast service. For details, see MCAST/3/OVER_INDEX.
  3. Run the display current-configuration command to check detailed device configuration. Run the undo vsi vsi-name command to delete unnecessary VPLS service.
  4. Run the vsi vsi-name command to create a VSI. Then, check whether the problem is rectified. If the problem is not rectified, go to step 5.
  5. Collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 572368

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next