No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



PIM/6/SRC_MASK_UNSUPPORTED:In VPN instance [vpn-instance-name], the length of the mask of the source address [source-address]/[source-mask-length] in the Join/Prune message was unsupported, so this source was ignored. (FlCode=[STRING][ULONG])


The source address contained in the Join/Prune message was ignored, because PIM-SM did not support the mask length of the source address.


Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[source-address] Indicates the source address.
[source-mask-length] Indicates the mask length of source address.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

The PIM-SM-enabled interface receives a Join/Prune message, the mask length of the source address contained in which is not supported by PIM-SM.


  • This log message is informational only, and no action is required.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 553180

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next