No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



NTP/4/STRATUM_CHANGE:System stratum changes from [stratum1] to [stratum2]. (SourceAddress=[STRING])


The stratum of the source reference clock is changed.


Parameter Name Parameter Meaning
[stratum1] Indicates the stratum of the system before clock update.
[stratum2] Indicates the stratum of the system after clock update.
SourceAddress Indicates the IP address of the source reference clock.

Possible Causes

1: The system had just selected the source reference clock.

2: The switchover of source reference clocks was performed during clock synchronization.


  1. This log message is informational only, and no action is required.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 546718

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next