No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



NSADP/4/NS_ID_RPCFAIL: Failed to send message to slot [ULONG1]. ( Message type=[ULONG2], Error code=[ULONG3])


After the transmission of RPC/IPC messages failed, the NetStream module records the slot ID, message type, and error code.


Parameter Name Parameter Meaning
ULONG1 Indicates the slot ID.
Message type Indicates message type.
Error code Indicates the error code.

Possible Causes

RPC or IPC communication failed.


  1. Collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 571058

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next