No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ERPS/5/PORTSIGNALSTATUS

ERPS/5/PORTSIGNALSTATUS

Message

ERPS/5/PORTSIGNALSTATUS:The signal status of the interface is changed. (RingID=[ULONG], InterfaceName=[STRING], CurrentStatus=[STRING])

Description

The signal status of an interface added to an ERPS ring changed. The signal status includes physical status and protocol status of an interface.

Parameters

Parameter Name Parameter Meaning
RingID Ring ID
InterfaceName Interface name
CurrentStatus Current signal status of an interface

Possible Causes

The physical status or protocol status of an interface added to the ERPS ring changed.

Procedure

  1. Check that whether the physical status or protocol status of the interface changes.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 545957

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next