No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How to Find Desired Logs in This Manual

How to Find Desired Logs in This Manual

When a device is running, the log module on the device records user operations and events into log messages. Log messages allow you to learn about the running status of the device, analyze the network situations, locate faults, as well as diagnose and maintain the device.

You can log in to the device through console port or Telnet, run the display logbuffer command to view the logs stored in buffer, save logs on the device, and export the logs to a log server using the syslog protocol.

The following methods can help you quickly find out the desired logs:

  • The Brief information in a log message uniquely identifies a log, so you can search for the Brief information in the manual to find out the desired log, view log description, and learn about the handling method.

  • The parameters such as time, interface number, process ID, and device name in a log message are variable, so do not use these parameters to search for logs.


Log message: Apr 27 2014 07:45:35 HUAWEI %%01SHELL/4/LOGIN_FAIL_FOR_INPUT_TIMEOUT(s)[6]:Failed to log in due to timeout.(Ip=, UserNa me=**, Times=1, AccessType=TELNET, VpnName=)

Search for LOGIN_FAIL_FOR_INPUT_TIMEOUT in the manual, and you can see the log description: After entering a user name or password, a user failed to log in because of a timeout.

Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 553344

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next