No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



MD/4/MTILOST:In VPN instance "[vpn-instance-name]", when processing a group switch message, the MTI was not assigned for this MD. (FlCode=[STRING][ULONG])


The MTI does not belong to this multicast group.


Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

During the processing of the Group-Switching message, the MTI interface could not find the corresponding MD.


  1. Run the multicast-domain share-group command to re-configure a shared group and bind the group to the MTI interface.
  2. Run the ip address command on the MTI interface to configure an IP address for the interface.
  3. Run the pim command on the MTI interface to enable PIM.
  4. End.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 571049

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next