No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MCAST/6/FIB

MCAST/6/FIB

Message

MCAST/6/FIB:there is no flow in the fib entry (group ip= [STRING], source ip=[STRING] in-VlanID=[ULONG]).

Description

There is no data flow corresponding to the FIB entry.

Parameters

Parameter Name Parameter Meaning
group ip Indicates the group IP address.
source ip Indicates the source IP address.
in-VlanID Indicates the inbound VLAN ID.

Possible Causes

Multicast services are interrupted. As a result, there is no data flow corresponding to the FIB entry.

Procedure

  1. Run the display l2-multicast forwarding-table vlan vlan-id command to check the matching Layer 2 multicast forwarding entry has been correctly generated.
  2. Run the display interface brief command to check traffic statistics on the corresponding interfaces are normal.

    If the matching Layer 2 multicast forwarding entry has not been generated or interface traffic statistics are abnormal, join the multicast group again. If multicast services are still interrupted, go to step 3.

  3. Collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 569185

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next