No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



LDP/4/IMPMSGLISTEXCEED:The length of the LDP important message list reached the alarm threshold [threshold].


The length of the LDP important message list reached the alarm threshold.


Parameter Name Parameter Meaning
[threshold] Indicates the alarm threshold of the LDP message list.

Possible Causes

After a large number of LDP messages were received, these messages were not processed in time, causing the queue length to the alarm threshold.


  1. Run the display memory-usage command to check memory usage.
  2. If necessary and allowed, run the reset mpls ldp command in the user view to clean the linked list. Exercise caution when running this command because all LDP sessions will be reset.
  3. Collect log information and configuration information, and then contact technical support personnel.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 545508

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next