No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



ALML/0/BRD_PWOFF: Board is powered off for overtemperature.(Index=[ULONG], EntityPhysicalIndex=[ULONG], PhysicalName=[STRING], EntityTrapFaultID=[ULONG])


The board is powered off because of overtemperature.


Parameter Name Parameter Meaning
Index Indicates the entity index.
EntityPhysicalIndex Indicates the entity index.
PhysicalName Indicates the entity name.
EntityTrapFaultID Indicates the trap ID.

Possible Causes

  • The fan module is removed.
  • The fan module is faulty.


  1. Run the display fan command to check whether the fan module is installed properly.
    • If so, go to step 2.
    • If not, install the fan module properly.
  2. Rectify the fault according to "A Fan Fails" in the Revelations of Troublesolving - Campus Switch - Hardware Fault.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 546658

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next