No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



OSPF/6/CONFLICT_ROUTERID_INTRA_RECOVER: Router IDs confliction is recovered. (ProcessId=[ProcessId], AreaId=[AreaId], OldRouterId=[OldRouterId], NewRouterId=[NewRouterId])


Router IDs confliction is recovered.


Parameter Name Parameter Meaning
ProcessId Indicates the ID of a process.
AreaId Indicates the ID of an area.
OldRouterId The old Router ID.
NewRouterId The new Router ID.

Possible Causes

At least two indirectly routers were configured with the same router ID, causing router LSAs to be constantly refreshed. As a result, route flapping occurs. Router IDs confliction is recovered.


  • This log message is informational only, and no action is required.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 543936

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next