No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



IPV6FIBAGENT/4/SENDQUESLOTFAIL6:FIB6 failed to send a query to slot [slot-number].


The FIB6 module failed to send a query to the interface board.


Parameter Name Parameter Meaning
[slot-number] indicates the slot number of an interface board.

Possible Causes

After active/standby switchover, the main control board must query the status of the interface board.


  1. Run the display fib overload state slot [ slot-number ] command to view overload status of the interface board and save the output of this command.
  2. Collect log information and configuration information, and then contact technical support personnel.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 578184

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next