No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SOCKET/6/TCPASYNQUEINFO

SOCKET/6/TCPASYNQUEINFO

Message

SOCKET/6/TCPASYNQUEINFO:The verbose information about the asynchronous queue of the current TCP socket was displayed. (Read=[ULONG], Write=[ULONG], Connect=[ULONG], Close=[ULONG], PeerClose=[ULONG], Accept=[ULONG], KeepAliveDown=[ULONG], Full at: [ULONG]:[ULONG]:[ULONG] (Hour:Minute:Second), LostMessage=[ULONG], MessageType=[ULONG])

Description

The detailed information about the asynchronous message queue of the current TCP socket was described in the log.

Parameters

Parameter Name Parameter Meaning
Read indicates the number of Read messages.
Write indicates the number of Write messages.
Connect indicates the number of Connect messages.
Close indicates the number of Close messages.
PeerClose indicates the number of PeerClose messages.
Accept indicates the number of Accept messages.
KeepAliveDown indicates the number of Keep Alive Down messages.
Full at indicates the time when the asynchronous message queue becomes full. The format is HH:MM:SS.
LostMessage indicates the number of lost messages.
MessageType indicates the type of lost messages. The types of lost messages are shown as follows

1. Read

2. Write

3. Connect

4. Close

5. Accept

6. PeerClose

7. KeepAliveDown

Possible Causes

1. The user called the Close function to turn off the socket.

2. The TCP server received RST packets from the TCP client.

3. TCP retransmission timed out.

4. Failed to perform TCP keepalive detection.

Procedure

  1. This log message indicates a normal situation, and no action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 577587

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next