No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF/6/ONE_IF_EXIT_WAITING

OSPF/6/ONE_IF_EXIT_WAITING

Message

OSPF/6/ONE_IF_EXIT_WAITING:OSPF [process-id] Interface [interface-name] exits waiting state, interface in waiting state count is [waitng-state-count].

Description

The OSPF interface exited from the Waiting state, and the number of interfaces in the Waiting state is X.

Parameters

Parameter Name Parameter Meaning
[process-id] Indicates the ID of an OSPF process.
[Interface-name] Indicates the name of an interface.
[waitng-state-count] Indicates the number of nodes in the Waiting state.

Possible Causes

The OSPF process finished GR with the neighbor on the sham link.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 543547

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next