No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



VBST/4/PVIDERR: In VBST VLAN [ULONG], the port [STRING]'s PVID is inconsistent with remote port.


PVIDs of directly connected ports in VBST are different.


Parameter Name Parameter Meaning
[ULONG] Indicates conflicting PVIDs.
[STRING] Indicates the port name and number.

Possible Causes

PVIDs of directly connected ports are different.


  1. Run the display stp brief command to check whether a port PVID conflict is detected.

    • If so, re-plan and configure PVIDs for directly connected ports.
    • If not, go to step 2.

  2. Collect trap, log, and configuration information, and contact technical support personnel.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 576229

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next