No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SHELL/6/CMDCONFIRM_RECORD

SHELL/6/CMDCONFIRM_RECORD

Message

SHELL/6/CMDCONFIRM_RECORD: When being asked whether to execute the command "[command]", the user chose [Y/N].(Task=[Task], IP=[IP], VpnName=[VpnName], User=[User])

Description

The user chose Y or N to decide whether to disable the command "[command]".

Parameters

Parameter Name Parameter Meaning
command Command line
Y/N A user can decide whether to disable the command "[command]":
  • Y: Disable the command "[command]".
  • N: Do not disable the command "[command]".
Task Task ID
Ip IP address

When the device fails to obtain the user IP address, for example, in a scenario where the user logs in using a Console interface or AUX interface, asterisks (**) are used to indicate the IP address.

VpnName VPN instance name
User User name

For an internal command, if the device fails to obtain the user name, "_system_" is used as the user name. If a user uses the password authentication mode for login but the device fails to obtain the user name, "**" is used as the user name.

Possible Causes

When you intended to disable the command "[command]", the system prompted you to decide whether to execute.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 568917

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next