No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IFNET/4/BWRATE_IN_RESUME

IFNET/4/BWRATE_IN_RESUME

Message

IFNET/4/BWRATE_IN_RESUME:Interface input flow bandwidth usage was restored to the log threshold. (Interface=[interface], BandWidthUsage=[usage], LogThreshold=[threshod], InterfaceName=[interfacename])

Description

Bandwidth usage for traffic received by an interface was lower than the configured threshold for generating a log about bandwidth usage.

Parameters

Parameter Name Parameter Meaning
Interface Interface index
BandWidthUsage Current bandwidth usage
LogThreshold Configured threshold
InterfaceName Interface name

Possible Causes

Bandwidth usage for traffic received by an interface is lower than the configured threshold for generating a log about bandwidth usage.

Procedure

  1. This log information is informational only, and no action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 540308

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next