No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



L2V/5/VPLSVC_BACKUP:The status of the VPLS VC turned BACKUP. (VsiName=[string], RemoteIp=[IPADDR], PwId=[ULONG], Reason=[string], SysUpTime=[TIMETICK])


The VPLS VC turned to the backup state.


Parameter Name Parameter Meaning
VsiName Indicates the name of the VSI.
RemoteIp Indicates the IP address of the remote end.
PwId Indicates the ID of the PW.
Reason Indicates the cause of VC status change:
  • The bound VRRP turned to a non-master state, such as the backup state.
  • The interface board bound to VRRP was pulled out.
SysUpTime Indicates the startup time of the system.

Possible Causes

The bound VRRP turned to a non-master state, such as the backup state or the interface board bound to VRRP was pulled out.


  1. This log message is informational only, and no action is required.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 576222

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next