No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
QINQ/5/ISSUSPEC_CHECK

QINQ/5/ISSUSPEC_CHECK

Message

QINQ/5/ISSUSPEC_CHECK:The QinQ specifications were changed in the new version. (Spec=[STRING], Value=[ULONG])

Description

QinQ specifications were changed in the new version.

Parameters

Parameter Name Parameter Meaning
Spec Specifications
  • QINQ_ISSU_QINQ_CFG_NUM: maximum number of QinQ entries that can be configured on a sub-interface.

  • QINQ_ISSU_DOT1Q_CFG_NUM: maximum number of Dot1q entries that can be configured on a sub-interface.

  • QINQ_ISSU_STACK_CFG_NUM: maximum number of stacking entries that can be configured on a sub-interface.

  • QINQ_ISSU_VLANGROUP_MAX_NUM: maximum number of VLAN groups that can be configured on a sub-interface.

Value Value

Possible Causes

QinQ specifications were changed in the new version.

Procedure

  1. Stop the ISSU.
  2. Perform the lossy ISSU.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 569810

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next