No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



RM/3/RPM_ROUT_MAX_LMT:The number of policies in the route policy management reached maximum limit when a prefix list filter was created for the specified prefix list name and instance.


The number of elements in the routing policy management reached the upper limit when a prefix list was created for the given prefix list name and the instance.


Parameter Name Parameter Meaning
None None

Possible Causes

The number of configured prefix lists exceeded the allowable maximum number.


  1. If services are not affected, no action is required.
  2. If services are affected, run the display ip ip-prefix command in the user view to check the configured IPv4 address prefix lists, and Collect log information and configuration information, and then contact technical support personnel.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 570280

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next