No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



L2V/5/VSIRMTLCLIDSAME:The remote site ID is the same as the local site ID, and the connection may not be established. (VsiName=[STRING], Rlb: SiteId=[ULONG], Pe=[STRING], Rd=[STRING])


The remote site ID is the same as the local site ID, and the connection may not be established.


Parameter Name Parameter Meaning
VsiName Indicates the name of VSI.
Rlb Indicates the remote label block.
SiteId Indicates the site ID of the RLB.
Pe Indicates the IP address of the PE in the RLB.
Rd Indicates the route distinguisher of the RLB.

Possible Causes

The site IDs on the two PEs connected through Komeplla VPLS were the same.


  1. Change any one of the two site IDs.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 568941

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next