No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



TRAFSTAT/5/VSIDISABLE:The statistical function of the PW was not enabled. (VsiName=[STRING], PeerAddress=[STRING], VcId/RemoteSiteId=[ULONG])


When a user disabled statistics collection, the system prompted the user that statistics collection was not enabled on the PW.


Parameter Name Parameter Meaning
VsiName Indicates the name of a VSI.
PeerAddress Indicates the IP address of the peer end.
VcId/RemoteSiteId Indicates the VC ID or the IP address of the remote end.

Possible Causes

The statistical function of the PW was not enabled.


  1. Use command display current-configuration configuration vsi to check if the statistical function of the PW is enabled, and no further action is required.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 548233

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next