No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



ARP/6/ARPIGNORETC: The user chooses [Y/N] when deciding whether to ignore topology change.


When deciding whether to ignore the changes of topology, the user chose [Y/N].


Parameter Name Parameter Meaning
[Y/N] Indicates whether to ignore the changes of topology. The value is Yes or No.

Possible Causes

The arp topology-change disable command was run in the system view, and the user needs to decide whether to ignore the changes of topology.


  1. Check whether the ARP entries are updated or not after the topology changed.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 576754

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next