No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



LDP/6/PEERRESTART:The peer LSR [peer-id] was restarting.


The peer LSR was being restarted.


Parameter Name Parameter Meaning
[peer-id] Indicates the peer LSR ID.

Possible Causes

The local end set up the session with the peer end when the neighboring device was restarted or the session flapped. The precondition was that the LDP GR was configured before the LSR connection was established.


  1. If the peer is restarted, this log message indicates a normal situation, and no action is required.
  2. If the session flaps, run the display interface command to check whether links between the two devices are normal and run the display tcp status command to check whether TCP connections are normal.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 545774

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next