No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



QOSE/3/CMD_FAIL:The command ([STRING1]) executed failed on slot [STRING2].


The qos local-precedence-queue-map command fails to be executed on the LPU in the specified slot.


Parameter Name Parameter Meaning
STRING1 Command that fails to be executed, that is, qos local-precedence-queue-map.
STRING2 Slot ID of the LPU.

Possible Causes

The qos local-precedence-queue-map command is executed on the LPU that does not support this command.


  1. Check whether the LPU is required to support qos local-precedence-queue-map based on networking and service requirements.
    • If so, go to step 2.
    • If not, go to step 3.
  2. Use the LPU that supports qos local-precedence-queue-map to replace the existing one.


    LE1D2S04SEC0, LE1D2X32SEC0, LE1D2H02QEC0, and X series cards do not support qos local-precedence-queue-map.

  3. This message is informational only, and no action is required.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 569936

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next