No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SOCKET/4/TCP_AUTH_FAILED

SOCKET/4/TCP_AUTH_FAILED

Message

SOCKET/4/TCP_AUTH_FAILED:TCP authentication failed. (AuthenticationType=[STRING], Cause=[STRING], SourceAddress=[IPADDR], SourcePort=[USHORT], ForeignAddress=[IPADDR], ForeignPort=[USHORT], Protocol=[STRING], VpnInstanceName=[STRING])

Description

An upper-layer application protocol configured the MD5 or keychain authentication password for the TCP connection, but the MD5 or keychain authentication failed when the TCP connection was established.

Parameters

Parameter Name Parameter Meaning
AuthenticationType

Authentication type. It can be MD5 or keychain.

Cause Cause of the authentication failure.
SourceAddress Source IP address.
SourcePort Source port number.
ForeignAddress Destination IP address.
ForeignPort Destination port number.
Protocol

Upper-layer application protocol, such as BFD and LDP.

VpnInstanceName VPN instance name.

Possible Causes

Cause 1:

Different authentication modes were configured on the local and remote devices. Do not configure MD5 authentication on one end and configure keychain mode on the other end.

Cause 2:

Different MD5 authentication passwords were configured on the local and remote devices.

Cause 3:

Different keychain encryption algorithms and authentication passwords were configured on the local and remote devices.

Procedure

  1. Based on the configuration requirements and procedures of MD5 or keychain mode, check whether the configuration is correct.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 541799

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next