No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PIM/4/BACKUPJP_NORP

PIM/4/BACKUPJP_NORP

Message

PIM/4/BACKUPJP_NORP:In VPN instance "[vpn-instance-name]", when trying to send a (*, [group-address]) Join message, PIM cannot obtain the RP. (FlCode=[STRING][ULONG])

Description

The PIM failed to obtain the RP when trying to send a Join message (*,G).

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[group-address] Indicates the group address.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

The RP is not backed up to the slave board, causing the PIM unable to find the RP after the GR process.

Procedure

  1. Run the display pim [ vpn-instance vpn-instance-name | all-instance ] rp-info command to check whether the RP exists.
  2. Run the static-rp or c-rp command in the PIM view to configure the RP.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 542644

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next