No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MPLS/4/VSI_ADD_DENYACL

MPLS/4/VSI_ADD_DENYACL

Message

MPLS/4/VSI_ADD_DENYACL: Add VSI deny ACL failed. (SlotID=[ULONG])

Description

The device failed to deliver the ACL that rejects VSI packets.

Parameters

Parameter Name Parameter Meaning
SlotID Indicates the slot ID.

Possible Causes

ACL resources are exhausted.

Procedure

  1. Run the display acl resource command to check whether the ACL resources are exhausted.
  2. If they are exhausted, delete the unneeded ACL entries under the guidance of technical support personnel.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 569884

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next