No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
EZOP/3/PROCESS_STOP

EZOP/3/PROCESS_STOP

Message

EZOP/3/PROCESS_STOP: Easy-operation upgrade process has been stopped(Reason=[STRING]).

Description

An EasyDeploy upgrade has stopped.

Parameters

Parameter Name Parameter Meaning
[STRING] Indicates the reason why the upgrade process stops.

Possible Causes

The reasons why an EasyDeploy upgrade stops include but not limit to the following:

  • 1: The device detects inputs on the serial port.
  • 2: The device is upgrading using a USB flash drive.

Procedure

  • If reason 1 is displayed, stops the operation on the serial port and restart the EasyDeploy upgrade process. No input is allowed on the serial port during an EasyDeploy upgrade process.
  • If reason 2 is displayed, select either EasyDeploy upgrade or USB-based upgrade.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 539794

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next