No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
TNLM/5/ADD_NODE

TNLM/5/ADD_NODE

Message

TNLM/5/ADD_NODE:Failed to add RadixNode to tunnel binding tree(NextHopIpAddr = [ULONG],TunnelIfIndex = [ULONG]).

Description

Failed to add the node to the tunnel binding tree.

Parameters

Parameter Name Parameter Meaning
NextHopIpAddr Indicates the IP address of the next hop.
TunnelIfIndex Indicates the index of the tunnel interface.

Possible Causes

Failed to add the node to the tunnel binding tree.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 569187

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next