No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SHELL/5/CMDRECORDFAILED

SHELL/5/CMDRECORDFAILED

Message

SHELL/5/CMDRECORDFAILED:Recorded command information. (Task=[string], Ip=[string], VpnName=[STRING], User=[string], AuthenticationMethod="[STRING]", Command="[string]", Result=[string])

Description

Information about the command execution failure was recorded.

Parameters

Parameter Name Parameter Meaning
Task Indicates the task name.
Ip Indicates the IP address.

When the device fails to obtain the user IP address, for example, in a scenario where the user logs in using a Console interface or AUX interface, asterisks (**) are used to indicate the IP address.

VpnName Indicates a VPN instance name.
User Indicates the user name.

For an internal command, if the device fails to obtain the user name, "_system_" is used as the user name. If a user uses the password authentication mode for login but the device fails to obtain the user name, "**" is used as the user name.

AuthenticationMethod Indicates the user authentication mode.
Command Indicates the command that is executed.
Result Indicates a command execution result. The available options are ExecutionFailure and AuthenticationFailure.

Possible Causes

Executing the command failed.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 553466

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next