No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



ALML/4/ENTRESET:[STRING1] is reset. The reason is: [STRING2].


A board is reset.


Parameter Name Parameter Meaning
STRING1 Information about the reset entity. For example, describe information about a board through the board name, board type, or board slot ID.
STRING2 Reason for reset of an entity.

Possible Causes

  • A board is reset using a reset command.
  • The system runs abnormally. Cause 2 can be described in detail through the second parameter.


  1. Check whether the device is manually reset using a reset command.
    • If so, no action is required. Wait until the device starts.
    • If not, go to step 2.
  2. Collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 547869

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next