No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



TRAFSTAT/5/VSIENABLE:The statistical function of the PW had been enabled. (VsiName=[STRING], PeerAddress=[STRING], VcId/RemoteSiteId=[ULONG])


When a user enabled statistics collection, the system prompted the user that statistics collection was enabled on the PW.


Parameter Name Parameter Meaning
VsiName Indicates the name of a VSI.
PeerAddress Indicates the IP address of the peer end.
VcId/RemoteSiteId Indicates the VC ID or the IP address of the remote end.

Possible Causes

The command was reconfigured.


  • Run the display current-configuration configuration vsi command to check whether statistics collection is configured, and no further action is required.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 576237

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next