No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALML/4/MEMSIZE_DIFF

ALML/4/MEMSIZE_DIFF

Message

ALML/4/MEMSIZE_DIFF:Memory size is different. (MasterMem=[ULONG1],SlaveMem=[ULONG2])

Description

In the active/standby environment, the active and standby MPUs have different sizes of memory.

Parameters

Parameter Name Parameter Meaning
ULONG1 Size of memory of active MPU
ULONG2 Size of memory of standby MPU

Possible Causes

The active and standby MPUs have different sizes of memory.

Procedure

  • If the MPU that has smaller memory serves as the active MPU, the system can start normally. In this case, this log does not need to be processed.
  • If the MPU that has larger memory serves as the active MPU, the standby MPU that has smaller memory cannot be started. You are advised to use the MPU that has smaller memory as the active MPU.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 545500

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next