No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



SECE/3/ARPS_DROP_PACKET_IF_SPDLMT:Rate of arp packets on interface exceeds the limit.(SourceMAC=[STRING], SourceIP=[STRING], SourceInterface=[STRING], DropTime=[STRING])


The rate of ARP packets on the interface exceeds the threshold.


Parameter Name Parameter Meaning


Indicates the source MAC address of the ARP packets.


Indicates the source IP address of the ARP packets.


Indicates the source interface of the ARP packets.


Indicates the packet discard time.

Possible Causes

The rate of ARP packets on the interface exceeds the threshold.


  • If the processing speed becomes slow or the CPU usage is too high, run the arp anti-attack rate-limit command to adjust the threshold.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 577856

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next