No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



ISIS/6/FAIL_CMD_IN_SMB:ISIS on the SMB failed to run commands.(FunctionID=[ULONG], DisableFlag=[ULONG])


IS-IS failed to run the command on the SMB.


Parameter Name Parameter Meaning
FunctionID Indicates the ID of the command line.
DisableFlag Indicates the identifier of disabling the command line.

Possible Causes

IS-IS failed to run the command line on the SMB.


  1. Run the display diagnostic-information command and save the command output; contact technical support personnel.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 545730

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next