No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



POE/4/PORTPDOVERLD: PD on the GE interface is over load.(Interface name =[STRING])


The power of PD connected to a GE port exceeds the maximum power of the port.


Parameter Name Parameter Meaning
[STRING] Indicates a port ID.

Possible Causes

The power of the PD exceeds the maximum power of the port.


  • Run the poe power command to increase the maximum power of the port.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 571016

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next